If you have a website or an app, speed is important. The quicker your web site loads and the swifter your web applications operate, the better for you. Since a website is just a selection of data files that talk with each other, the devices that store and work with these data files have a crucial role in website efficiency.

Hard drives, or HDDs, were, until recent times, the more effective devices for storing data. Having said that, recently solid–state drives, or SSDs, have been rising in popularity. Check out our assessment chart to find out whether HDDs or SSDs are more suitable for you.

1. Access Time

SSD drives offer a completely new & progressive method to data storage based on the utilization of electronic interfaces rather than any sort of moving parts and revolving disks. This innovative technology is way quicker, allowing for a 0.1 millisecond data file accessibility time.

HDD drives depend on rotating disks for files storage reasons. When a file is being accessed, you need to await the right disk to reach the correct place for the laser beam to access the data file involved. This results in a standard access rate of 5 to 8 milliseconds.

2. Random I/O Performance

On account of the same revolutionary strategy that enables for speedier access times, also you can take pleasure in much better I/O efficiency with SSD drives. They are able to carry out twice as many procedures throughout a given time in comparison to an HDD drive.

An SSD can deal with a minimum of 6000 IO’s per second.

All through the very same lab tests, the HDD drives confirmed to be considerably slower, with only 400 IO operations managed per second. Even though this looks like a large amount, for people with a hectic server that serves plenty of well known web sites, a sluggish hard disk can lead to slow–loading web sites.

3. Reliability

SSD drives don’t have any rotating parts, which means there is a lesser amount of machinery within them. And the less physically moving components you will find, the lower the possibilities of failing will be.

The standard rate of failure of an SSD drive is 0.5%.

HDD drives implement spinning hard disks for holding and reading through files – a concept going back to the 1950s. With hard disks magnetically suspended in mid–air, spinning at 7200 rpm, the prospects of something going wrong are generally increased.

The normal rate of failing of HDD drives can vary among 2% and 5%.

4. Energy Conservation

SSD drives are usually small compared to HDD drives and they lack any moving parts whatsoever. It means that they don’t create as much heat and require less electricity to function and fewer energy for cooling down purposes.

SSDs take in somewhere between 2 and 5 watts.

HDD drives can be known for being noisy; they’re more likely to getting too hot and when you have several hard drives within a web server, you must have an extra a / c system used only for them.

All together, HDDs consume somewhere between 6 and 15 watts.

5. CPU Power

SSD drives support swifter file access rates, that, in return, permit the CPU to finish file calls much quicker and afterwards to return to other duties.

The standard I/O hold out for SSD drives is exactly 1%.

By using an HDD, you’ll have to dedicate additional time watching for the outcome of your data request. It means that the CPU will stay idle for further time, waiting around for the HDD to respond.

The common I/O delay for HDD drives is about 7%.

6.Input/Output Request Times

The vast majority of iLink Hosting’s brand–new web servers now use just SSD drives. Our very own tests have established that with an SSD, the typical service time for any I/O request while operating a backup continues to be under 20 ms.

In comparison with SSD drives, HDDs provide significantly slower service times for I/O demands. During a server backup, the average service time for an I/O call ranges between 400 and 500 ms.

7. Backup Rates

Referring to back ups and SSDs – we’ve spotted an effective improvement with the back up speed since we moved to SSDs. Right now, a usual hosting server back up can take simply 6 hours.

On the other hand, with a server with HDD drives, the same data backup usually requires three to four times as long to complete. A complete back up of any HDD–driven hosting server may take 20 to 24 hours.

Should you want to promptly enhance the effectiveness of your websites without the need to adjust any kind of code, an SSD–driven website hosting solution is a excellent choice. Look at iLink Hosting’s web hosting packages and our VPS servers – these hosting solutions have really fast SSD drives and are offered at reasonable prices.

  • Service guarantees

  • Each one of our Virtual Private Servers is setup for you at no extra cost. 99.9% network uptime. Full root server access privileges.
  • Compare our prices

  • Effortlessly compare the allocations and features offered by iLink Hosting’s Virtual Private Servers. See exactly which VPS Web Hosting setup provides you with precisely what you will want to control your dynamic online presence with no hassle.
  • Compare our hosting plans
  • Contact Us

  • You can easily make contact with us 24 hours a day by email or by making use of our super–fast ticketing system. We offer a 1–hour response time guarantee.